Nylon 66 (PA 66) wide-specification and scrap prices are going up again in June. We have seen our buying price for PA 66 off spec pellets increase by about $.03 - $.04/lb. for material shipped in June. Looking back over the past year, I think we have seen PA66 prices go up every month for the past 12 months. Currently both USA domestic Nylon 66 producers are under force majeure due to the Butadiene shortage in North America. The Butadiene shortage has Nylon 66 supply tight in NA with no end in sight. Based on the current market conditions, I think we will see PA 66 supply stay tight through the end of 2010. Prices may not continue to increase monthly, but material will be tight through the end of the year.
Nylon 6 (PA 6) prices are on the way down in China at this time. The PA6 price decrease is being driven by the current softening price of Benzene. Prime Caprolactam prices are down, which is carrying over into the prime PA6 pellet market. We have seen PA 6 prime pellet prices in China fall about $.12 - $.15/lb. over the past 2 weeks due to the falling Benzene prices. Some prime PA6 pellets are currently selling at a price level below the price of prime Caprolactam, which makes no sense at all. Capro demand is weak in China at this time, because most of the nylon producers feel prices will continue to soften as Benzene prices head south.
The Acrylic (PMMA) market is very difficult for us to deal in at this time. The sale price in South China for low end monomer extraction scrap is around USD$1100-$1120/MT CFR HK, and we definitely cannot make this price work in today’s market. All of the major USA PMMA producers have their scrap priced over the $.50/lb., so buying PMMA scrap and exporting it to China is very difficult to say the least. We have been buying material to maintain our relationship with the producers, and to keep the material supply door open for when the acrylic scrap market turns around.
Dualloy sells the following types of Nylon 6 polymers waste.Nylon 6 Kettle Bottoms
Nylon 6 Depoly Residue
Nylon 6 Solidified Oligomer Waste
Nylon 6 Washwater
Nylon 6 Washwater/Oligomer Waste
Call for MOQ and current material prices.
Dualloy purchases/sells plastic resin and polymers in the following forms.
Aged/Obsolete Virgin Pellets
Wide-Specification Pellets
Clean uniform Plastic Regrinds
Reactor Lumps/Chunks/Patties
Nylon Fiber Bales
Dualloy has the following Nylon materials available for sale:Nylon 66 Semi Dull Wide Spec Pellets
Nylon 66 Dull Second Quality Pellets
Nylon 66 Textile Bright Pellets
Nylon 66 Pellets w/ up to 0.02% TiO2
Nylon 66 Mixed Color Regrind
Nylon 66 Bright / Semi Dull / Dull Baled Fibers
Prime Nylon 6 Pellets 2.7 RV - Natural
Packaged in 1,500# boxes
Dualloy sells the following types of Acrylic (PMMA) scrap.
Acrylic PMMA - Clear / White (segregated) lumps / chunks for crackback
Acrylic PMMA - Q1 / Q2 Clear / White / Green Extruded Sheet
Acrylic PMMA - Clear / White extruded sheet trim scrap
Please feel free to contact me at: JamesGubera@dualloy.com
Showing posts with label PMMA Acrylic Recycling. Show all posts
Showing posts with label PMMA Acrylic Recycling. Show all posts
Wednesday, June 2, 2010
Thursday, January 28, 2010
Prime Acrylic PMMA Prices to increase in February 2010
We are already seeing the price of Acrylic (PMMA) scrap going up by about $.03-$.04/lb in advance of the announced February 2010 price increase for prime PMMA sheet and pellets. Based on the price of MMA continuing to go up in the first quarter of 2010, the price of prime acrylic sheet and PMMA pellets will go up by 5-7% by mid-February. And do not be surprised if there is not another MMA price increase at the beginning of the second quarter of this year as well. MMA feedstock prices keep going up, so I expect to see the price of prime PMMA continue to rise in the first half of 2010.
Acrylic scrap supply in the USA is still tight due to our continued sluggish automobile and housing markets. Most of the major PMMA polymer producers are still running at plant utilization rates lower than what they were producing before the market correction at the end of 2008. This is why we see less PMMA scrap in the market that is available for recycling and MMA monomer recovery. Although business does seem to be picking up, and almost all of the PMMA polymers producers are starting to see slight increases in demand for their finished pellets and sheet. So maybe we will start to see a little more PMMA scrap entering the recycle stream from the USA, as we start see some recovery in the automobile and housing sectors.
The price for both Nylon 66 (PA 66) and Nylon 6 (PA 6) scrap is going up on February 1st. I think Nylon 6 scrap will see the greatest price adjustment, because prime PA 6 has seen the largest price increase since the first of the year ($0.24/lb). Do not be surprised if you see the price of wide specification (off grade) PA 6 pellets rise by $0.08-$0.14/lb. in February 2010. I think both of the largest USA PA 6 producers are trying hard to push through the same price increases for second quality pellets as they have announced for prime PA 6 resin.
The price of Nylon 66 scrap continues to go up on a monthly basis, and we have seen all of PA 66 materials increase in price between $.05-$.07/lb that have been purchased for February shipment. The price for PA 66 wide spec bright pellets and bright fiber bales increased the most this month, and all PA 66 base polymer pellets, baled fibers and lump/chunk regrind prices are up again in February as well.
Here are some of the other material price increases that the market has seen in 2010.
ABS / SAN Price was up $.12/lb in January, $.05/lb increase announced for Feb 1st.
Styrene Price was up $.10/lb in January, $.05/lb increase announced for Feb 1st.
Polycarbonate After the announced February price increase, it will be up in price by $.15/lb. since the start of 2010.
Dualloy sells the following types of Acrylic (PMMA) sheet / scrap.
Acrylic PMMA - Clear / White (segregated) lumps / chunks for crackback
Acrylic PMMA - Q1 / Q2 Clear / White / Green Extruded Sheet
Acrylic PMMA - Clear / White extruded sheet trim scrap
Dualloy Sells the following types of plastic resins and polymers.
Nylon 66 – PA 66 Wide Specification Pellets, Baled Fibers, Regrinds
Nylon 6 – PA6 Prime Pellets, wide specification pellets, plant scrap
ABS, SAN, GPPS Wide Specification Pellets, GPPS / SAN Devol Pellets
SBS, SEBS, SIBS Second Quality Pellets, Aged/Obsolete Inventory
TPU, TPR, TPE
Dualloy purchases/sells plastic resin and polymers in the following forms.
Aged/Obsolete Virgin Pellets
Wide-Specification Pellets
Clean uniform Plastic Regrinds
Reactor Lumps/Chunks/Patties
Nylon Fiber Bales
Dualloy has the following Nylon 66 (PA66) materials available for sale:
Nylon 66 Semi Dull Wide Spec Pellets
Nylon 66 Dull Second Quality Pellets
Nylon 66 Textile Bright Pellets
Nylon 66 Pellets w/ up to 0.02% TiO2
Nylon 66 Mixed Color Regrind
Nylon 66 Bright / Semi Dull / Dull Baled Fibers
Prime Nylon 6 Pellets 2.7 RV - Natural
Packaged in 1,500# boxes
Nylon 6 Wide Spec Chips – High Residual Monomer
Mixed Grades / Mixed RV’s 2.4 – 5.0
May have up to 10% residual monomer
Will contain pellets with TiO2
May have blue/green HS pellets present
PA6 Unpelletized Chopped Strands – High Residual Monomer
Mixed Grades / Mixed RV’s 2.4 – 5.0
May have up to 10%-12% residual monomer
Will contain pellets with TiO2
Prime ABS Natural Pellets
3.5 Melt / 4 Izod - Low Gloss
ABS Natural Wide Specification Pellets
4 Melt / 7 Izod - High Gloss
ABS Black Pellets
5 Melt / 4 Izod
Prime SAN Pellets
8 Melt Crystone
SAN Devol Pellets
Blue Color
GPPS Devol Pellets
Mixed Color for Black
Please feel free to contact me at: JamesGubera@dualloy.com
Acrylic scrap supply in the USA is still tight due to our continued sluggish automobile and housing markets. Most of the major PMMA polymer producers are still running at plant utilization rates lower than what they were producing before the market correction at the end of 2008. This is why we see less PMMA scrap in the market that is available for recycling and MMA monomer recovery. Although business does seem to be picking up, and almost all of the PMMA polymers producers are starting to see slight increases in demand for their finished pellets and sheet. So maybe we will start to see a little more PMMA scrap entering the recycle stream from the USA, as we start see some recovery in the automobile and housing sectors.
The price for both Nylon 66 (PA 66) and Nylon 6 (PA 6) scrap is going up on February 1st. I think Nylon 6 scrap will see the greatest price adjustment, because prime PA 6 has seen the largest price increase since the first of the year ($0.24/lb). Do not be surprised if you see the price of wide specification (off grade) PA 6 pellets rise by $0.08-$0.14/lb. in February 2010. I think both of the largest USA PA 6 producers are trying hard to push through the same price increases for second quality pellets as they have announced for prime PA 6 resin.
The price of Nylon 66 scrap continues to go up on a monthly basis, and we have seen all of PA 66 materials increase in price between $.05-$.07/lb that have been purchased for February shipment. The price for PA 66 wide spec bright pellets and bright fiber bales increased the most this month, and all PA 66 base polymer pellets, baled fibers and lump/chunk regrind prices are up again in February as well.
Here are some of the other material price increases that the market has seen in 2010.
ABS / SAN Price was up $.12/lb in January, $.05/lb increase announced for Feb 1st.
Styrene Price was up $.10/lb in January, $.05/lb increase announced for Feb 1st.
Polycarbonate After the announced February price increase, it will be up in price by $.15/lb. since the start of 2010.
Dualloy sells the following types of Acrylic (PMMA) sheet / scrap.
Acrylic PMMA - Clear / White (segregated) lumps / chunks for crackback
Acrylic PMMA - Q1 / Q2 Clear / White / Green Extruded Sheet
Acrylic PMMA - Clear / White extruded sheet trim scrap
Dualloy Sells the following types of plastic resins and polymers.
Nylon 66 – PA 66 Wide Specification Pellets, Baled Fibers, Regrinds
Nylon 6 – PA6 Prime Pellets, wide specification pellets, plant scrap
ABS, SAN, GPPS Wide Specification Pellets, GPPS / SAN Devol Pellets
SBS, SEBS, SIBS Second Quality Pellets, Aged/Obsolete Inventory
TPU, TPR, TPE
Dualloy purchases/sells plastic resin and polymers in the following forms.
Aged/Obsolete Virgin Pellets
Wide-Specification Pellets
Clean uniform Plastic Regrinds
Reactor Lumps/Chunks/Patties
Nylon Fiber Bales
Dualloy has the following Nylon 66 (PA66) materials available for sale:
Nylon 66 Semi Dull Wide Spec Pellets
Nylon 66 Dull Second Quality Pellets
Nylon 66 Textile Bright Pellets
Nylon 66 Pellets w/ up to 0.02% TiO2
Nylon 66 Mixed Color Regrind
Nylon 66 Bright / Semi Dull / Dull Baled Fibers
Prime Nylon 6 Pellets 2.7 RV - Natural
Packaged in 1,500# boxes
Nylon 6 Wide Spec Chips – High Residual Monomer
Mixed Grades / Mixed RV’s 2.4 – 5.0
May have up to 10% residual monomer
Will contain pellets with TiO2
May have blue/green HS pellets present
PA6 Unpelletized Chopped Strands – High Residual Monomer
Mixed Grades / Mixed RV’s 2.4 – 5.0
May have up to 10%-12% residual monomer
Will contain pellets with TiO2
Prime ABS Natural Pellets
3.5 Melt / 4 Izod - Low Gloss
ABS Natural Wide Specification Pellets
4 Melt / 7 Izod - High Gloss
ABS Black Pellets
5 Melt / 4 Izod
Prime SAN Pellets
8 Melt Crystone
SAN Devol Pellets
Blue Color
GPPS Devol Pellets
Mixed Color for Black
Please feel free to contact me at: JamesGubera@dualloy.com
Saturday, January 9, 2010
Recycling Acrylic - Polymethyl Methacrylate (PMMA) Waste / Scrap in the USA
Most types of Acrylic (PMMA) materials are recyclable and have enough value to make the PMMA scrap worth collecting for recycling purposes. If the acrylic scrap in not clean enough to be used to make new recycled content products, the material can be reprocessed to recover the acrylic monomer from the PMMA scrap. The Methyl Methacrylate (MMA) monomer extraction process is usually referred to as “cracking monomer” or “monomer crackback”, and is now typically done only in China and India. The recovered MMA is sold back into tier 2 type acrylic applications such as colored PMMA sheet / pellets, lacquers, and paints. In order to make good clear Acrylic sheet the sheet manufacturer will usually use virgin MMA, because the recovered MMA is not clear enough to make Q1 Grade Acrylic Sheet.
Dualloy Inc. is a plastics recycling and plastics sales company that purchases all types of acrylic waste and scrap for recycling. We work directly with the major North American / European PMMA polymer manufacturers, and plastics molding and converting companies to recycle their plant scarp / waste. Dualloy purchases PMMA wide specification injection molding / extrusion pellets, Q1 / Q2 masked sheet (extruded and cast), sheet trim scrap, and lumps/chunks and purge patties. Then we sell the material that we purchase and collect into the acrylic recycle markets around the world.
Dualloy is always interested in purchasing the following types of Acrylic (PMMA) scrap.
Aged / Obsolete Virgin Pellets Clear or Colors
Aged / Obsolete Q1 / Q2 Masked Sheet from inventory
Tub/Spa Vacuum Form Scrap (PMMA/ABS laminated sheet)
Sign Scrap / Waste (from both new/used signs)
Clear / White / Green Extruded Sheet
Profile / Sheet Extrusion Trim Scrap
Cast PMMA Sheet / Trim Scrap
Cast Sheet Trim w/PVC Gasket
Injection Molding Parts / Purge
Automotive Tail Light Assemblies
Impact Modified (DR Type) scrap
Airplane / Bus / Helicopter Windows
Bank / Barrier / Bullet Resistant Sheet
POP Displays
Dualloy has the following PMMA materials available for sale:
Clear / White (segregated) lumps / chunks for crackback
Q1 / Q2 Clear / White / Green Extruded Sheet
Clear / White extruded sheet trim scrap
If your company generates PMMA scrap or waste please give Dualloy a call, so we can purchase your material for one of our Acrylic recycling or MMA monomer recovery programs.
Please feel ree to send me an email to: JamesGubera@Dualloy.com
Dualloy Inc. is a plastics recycling and plastics sales company that purchases all types of acrylic waste and scrap for recycling. We work directly with the major North American / European PMMA polymer manufacturers, and plastics molding and converting companies to recycle their plant scarp / waste. Dualloy purchases PMMA wide specification injection molding / extrusion pellets, Q1 / Q2 masked sheet (extruded and cast), sheet trim scrap, and lumps/chunks and purge patties. Then we sell the material that we purchase and collect into the acrylic recycle markets around the world.
Dualloy is always interested in purchasing the following types of Acrylic (PMMA) scrap.
Aged / Obsolete Virgin Pellets Clear or Colors
Aged / Obsolete Q1 / Q2 Masked Sheet from inventory
Tub/Spa Vacuum Form Scrap (PMMA/ABS laminated sheet)
Sign Scrap / Waste (from both new/used signs)
Clear / White / Green Extruded Sheet
Profile / Sheet Extrusion Trim Scrap
Cast PMMA Sheet / Trim Scrap
Cast Sheet Trim w/PVC Gasket
Injection Molding Parts / Purge
Automotive Tail Light Assemblies
Impact Modified (DR Type) scrap
Airplane / Bus / Helicopter Windows
Bank / Barrier / Bullet Resistant Sheet
POP Displays
Dualloy has the following PMMA materials available for sale:
Clear / White (segregated) lumps / chunks for crackback
Q1 / Q2 Clear / White / Green Extruded Sheet
Clear / White extruded sheet trim scrap
If your company generates PMMA scrap or waste please give Dualloy a call, so we can purchase your material for one of our Acrylic recycling or MMA monomer recovery programs.
Please feel ree to send me an email to: JamesGubera@Dualloy.com
Subscribe to:
Posts (Atom)
